On Sunday, October 8 I rebolted part of the first pitch of the aid version
of "Ranger Bolts" (A1) on the Monolith.  I pulled and replaced the three
bolts on the traversing aid start.  The existing bolts were the following:
a 3/8" x 2" Star Dryvin bolt and Leeper hanger, a 1/4" x 1" threaded split
shaft bolt and a Leeper hanger, and another 1/4" x 1" threaded split shaft
bolt and Leeper hanger.  The third bolt was already levered out 3/8" when I
pulled it.  These three bolts were each replaced in the same hole with a
3/8" x 3-1/2" Rawl 6-piece bolt and a Kong S.S. hanger.

The second bolt in the aid route bolt ladder was a 3/8" x 2" Star Dryvin
bolt and a Leeper hanger.  This bolt had been botched during its initial
placement, so the head was already levered out 1/2" before I easily pulled
it.  This bolt was then replaced with a 3/8" x 3-1/2" Rawl 6-piece bolt and
a Kong S.S. hanger.  The remainder of the bolt ladder is very solid (this
rock is very hard), despite the assortment of bolts and hangers.

Bolts Pulled:  4,  Bolts Placed 4

Mark Fletcher