| Home | People | Projects | Publications | Places |

Student Projects

Many of the Rehabilitation R&D Center's early successful projects began as student design team projects in the Mechanical Engineering Department of Stanford University. We have lately established similar relationships with the Industrial Engineering Department at California State University, San Jose. Students work on Rehab R&D Center-initiated projects which primarily fulfill an academic course requirement. For each student project initiated through the Center, the students, faculty advisor, academic course, and Rehab R&D liaison are indicated.


Masters Theses, Undergraduate Theses, Medical Scholars Projects, and Student Projects

Program: Research internship; Beaver College, Department of Physical Therapy
Title: Motor Unit Firing Patterns in Hemiplegia
Student: Mark C. Gardner, MS
Mentor: Carolynn Patten, PhD PT
Sponsor: Rehabilitation R&D Center


Program: Master's Thesis; San Jose State University, Department of Exercise Science
Title: Motor Unit Firing Patterns in Hemiplegia
Student: Lisa M. Dickinson, BS
Mentor: Carolynn Patten, PhD PT
Sponsor: Rehabilitation R&D Center


Program: Undergraduate Honors Thesis, University of Massachusetts, Amherst, Department of Exercise Science
Title: Motor Unit Firing Patterns in Hemiplegia
Student: Frederick J. Rumford, III
Mentor: Carolynn Patten, PhD PT
Sponsor: Rehabilitation R&D Center


Program: Winter 1999 - Spring 2000; ME282A,B, Stanford University
Title: Design of a minimally invasive posterior spinal fixation device
Students: Mike Holzbaur, May Liu, David Milestone, and Ryan Pierce
Coaches: Scott A. Yerby, PhD and Burney Winslow
Sponsor: Rehabilitation R&D Center and St. Francis Medical Technologies


Program: Winter 1998 - Spring 1999; ME282A,B, Stanford University
Title: Rheological and in vivo kinematic properties of athletic tape
Students: Richard Bragg, John MacMahon, and Erin Overom
Coaches: Scott A. Yerby, PhD and Gordon Matheson, MD
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: Winter 1998 - Spring 1999; ME282A,B, Stanford University
Title: Miniaturized hydrostatic pressure loading interface for cells in monolayer culture
Students: W. Lawrence Neeley, Scott Krueger, and Sudipta Chatterjee
Coaches: R. Lane Smith, PhD and Juergen Stampfl, PhD
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: Winter 1998 - Spring 1999; ME282A,B, Stanford University
Title: The effects of increased fluid pressure on bone resorption at prosthetic interfaces
Students: Tamer Ibrahim, Radit Tantisira, and Vivien Zraick
Coaches: Gary S. Beaupré, PhD and Stuart B. Goodman, MD, PhD
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: Spring 1999; ME113, Stanford University
Title: Toolhead for CAD-CAM fabrication of tissue-engineered body parts
Students: Larissa Fontaine, Hiral Parekh, Chien Si Harriman, and Dan Francis
Coaches: Eric E. Sabelman, PhD
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: Spring - Summer 1999; Independent Study, Stanford University
Title: Robot programming to simulate human trunk motion
Student: Kenneth N. Horne
Mentors: Eric E. Sabelman, PhD and H.F. Machiel Van der Loos, PhD
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: 1999 Paralyzed Veterans of America Summer Scholars Program
Title: Accelerometric analysis of car transfer strategies for application to individuals with spinal cord injury
Student: Erin Butler, University of Pennsylvania
Mentors: Eric E. Sabelman, PhD and Alyssa Colodny, RN (Spinal Cord Injury Center)
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: Summer - Fall 1999, Independent Study, Stanford University
Title: Upper body motion analysis of falls induced in the laboratory
Student: Hsin-yi Deng
Mentor: Eric E. Sabelman, PhD
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: Summer 1999, Independent Study, University of Pennsylvania
Title: Analysis of accelerometric data from diagnostic reaching tasks
Student: Yvonne Chen, University of Pennsylvania
Mentor: Eric E. Sabelman, PhD
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: Fall 1999 - Spring 2000, Medical Scholars project, Stanford University
Title: Peripheral nerve regeneration over long distances in an artificial nerve graft
Student: Mark Hong
Mentors: Eric E. Sabelman, PhD and Vincent R. Hentz, MD
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: Fall 1999, Independent study, Stanford University
Title: Analysis of accelerometric data from turn-in-place balance diagnosis task
Student: Patricia Soung
Mentors: Eric E. Sabelman, PhD and Ruth Yap, MS
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: 1999 Independent study, Stanford University
Title: Development of an Assistive Robot for Effective Health Care Delivery
Student: Oscar Madrigal
Mentor: H.F. Machiel Van der Loos, PhD
Sponsor: VA Palo Alto Rehabilitation R&D Center (Project B899-2DA)


Program: 1999 Independent study, Stanford University
Title: Development of an Assistive Robot for Effective Health Care Delivery
Student: Kyong S. Chang
Mentor: H.F. Machiel Van der Loos, PhD
Sponsor: VA Palo Alto Rehabilitation R&D Center (Project B899-2DA)


Program: 10/1998-12/1998; ME210/310, Stanford University
Title: Smart Bed Project
Students: Larisa Migachyov, Sinkian Ng, and Eric Kim
Mentor: H.F. Machiel Van der Loos, PhD
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: 1/1999-6/1999; ME210/310, Stanford University
Title: Smart Bed Project
Students: Joel Ford, Kevin Fine, and Mina Leung
Mentor: H.F. Machiel Van der Loos, PhD
Sponsor: VA Palo Alto Rehabilitation R&D Center


Program: 7/1999-12/1999; ME210/310, Stanford University
Title: Smart Bed Project
Students: Joel Ford and Joseph Norman
Mentor: H.F. Machiel Van der Loos, PhD
Sponsor: VA Palo Alto Rehabilitation R&D Center

Student Projects
Spring 1999

Stanford ME282 Projects

Project   Assessment of the Mechanical Proerties of Adhesive Athletic Tapes
Students   Rich Bragg, Erin Overom , and John MacMahon
Coaches   Scott A. Yerby, PhD and Gordy Mathesson, PhD

Project   Miniaturized Hydrostatic Pressure Loading Interface for Cells in Monolayer Culture
Students   Sudipta Chatterjee, Lawrence Neeley, and Scott Krueger
Coaches   R. Lane Smith, PhD and Jim Stampfl, PhD

Project   Integration of Kinematic and EMG Analysis with Normal Values for Patients with Cerebral Palsy
Students   Krishna Satyan, Steven Proulx, and Hsin-yi Deng
Coaches   Jessica Agramonte, PhD and Chris Dyrby, MS

Project   Wear in Total Joint Replacement
Students   Yu-heng Tseng, Cheryll Gill, and Cora Tse
Coaches   Jean Heegaard, PhD

Project   Biomechanics of Lower Limb Exercise
Students   Chris Cheng, Anna McVittie, and Leandro Espinosa
Coaches   Charlie Taylor, PhD and Robert Herfkens, MD

Project   The Effects of Particles Versus Pressure on Bone Resorption at Prosthetic Interfaces
Students   Vivien Zraick, Tamer Ibrahim, and Radit Tantisira
Coaches   Stuart Goodman, MD, PhD and Gary S. Beaupré, PhD

ME113 Projects

Project   Toolhead for CAD-CAM Fabrication of Tissue-engineered Body Parts
Students   Larissa Fontaine, Hiral Parekh, Chien Si Harriman, and Dan Francis
Coaches   Eric E. Sabelman, PhD

Project   Design and Development of an Alternating Lock to be Used in Upper-limb Prostheses
Students   Brian Miehm, Chris Buehler, Jan Moolsintong, and Omar Medeiros
Coaches   Maurice LeBlanc, MS

Independent Study Projects

Project   Design and Development of a Four Function Prosthetic Wrist
Students   Robert Blunt, Larisa Migachyov, and Gabriela Robles
Coaches   Maurice LeBlanc, MS

Project   Improved Walking on a Level Indoor Surface Using a Roll Brake Shoe
Students   Kevin Tran (SJSU)
Coaches   Cherly D. Pierson-Carey, MS and Maurice LeBlanc, MS



Student Projects
1998
Project   Load transfer in cementless intramedullary prostheses
Student   Jay Mandell, PhD
Facility   Dept. Mechanical Engineering, Stanford University
Academic advisor   Dennis R. Carter, PhD
RR&D advisor   Gary S. Beaupré, PhD

Project   Periprosthetic tissue differentiation
Student   Elizabeth Loboa, PhD candidate
Facility   Dept. Mechanical Engineering, Stanford University
Academic advisor   Dennis R. Carter, PhD
RR&D advisor   Gary S. Beaupré, PhD

Project   Creating a mechanistic-based bone remodeling theory
Student   Chris Hernandez., PhD candidate
Facility   Dept. Mechanical Engineering, Stanford University
Academic advisor   Dennis R. Carter, PhD
RR&D advisor   Gary S. Beaupré, PhD

Project   Mechanobiology of sesamoid development and tendon metaplasia
Student   Vineet Sarin, PhD candidate
Facility   Dept. Mechanical Engineering, Stanford University
Academic advisor   Dennis R. Carter, PhD
RR&D advisor   Gary S. Beaupré, PhD

Project   Driver's simulation environment for arm therapy
Student   Michelle Johnson, PhD candidate
Facility   Dept. Mechanical Engineering, Stanford University
RR&D advisor   H.F. Machiel Van der Loos, PhD

Project   Muscle activity in pedaling during emulation of asymmetrical crank torque profiles
Student   Michael Slavin, PhD candidate
Facility   Dept. Mechanical Engineering, University of California, Davis
RR&D advisor   Steven A. Kautz, PhD

Project   Quantitative imaging techniques for studying musculoskeletal function
Student   George Pappas, PhD candidate
Facility   Dept. Mechanical Engineering, Stanford University
RR&D advisor   Felix E. Zajac, PhD

Project   Simulations of muscle activity during pedaling
Student   George Chen, PhD candidate
Facility   Dept. Mechanical Engineering, Stanford University
RR&D advisor   Felix E. Zajac, PhD

Project   Muscle coordination of the human index finger and thumb during pinch grasping
Student   Joseph Towles, PhD candidate
Facility   Dept. Mechanical Engineering, Stanford University
RR&D advisor   Felix E. Zajac, PhD

Project   Bone quality and failure mode in pedicle screw systems
Student   Janet Sun , Engineers Degree candidate
Facility   Dept. Mechanical Engineering, Stanford University
Academic advisor   Dennis R. Carter, PhD
RR&D advisor   Scott A. Yerby, PhD

Project   Motor-unit firing patterns in hemiplegia
Student   Cheng Feng, PVA Summer Scholars Program
Facility   VA Palo Alto HCS
RR&D advisor   Carolynn Patten, PhD

Project   Bone Quality and Failure Mode in Pedicle Screw Systems
Students   Janet Sun, Nicholas Wharton, and Robert Cheng
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME282A,B - Biomechanical Engineering Project Class
RR&D advisor   Scott A. Yerby, PhD

Project   Analysis and Prototype of a Four Function Prosthetic Wrist
Students   Robert Blunt, Loren Bentley, Michael Axt, and Larisa Migachyov
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME282A,B - Biomechanical Engineering Project Class
RR&D advisor   Maurice LeBlanc, MS

Project   Bone Screw Cutting Flute Analysis
Students   Charles Corey Scott, Katie Messing, and Nathan Evans
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME282A,B - Biomechanical Engineering Project Class
RR&D advisors   Scott A. Yerby, PhD and Anne Hover

Project   Development of a smart bed
Students   Sung Han Kim, Ken Sinkian, and Larisa Migachyov
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME210 - Team-based design development with corporate partners
RR&D advisor   H.F. Machiel Van der Loos, PhD

Project   Design & Development of an Exoskeleton to Measure Wrist Joint Kinematics under Load
Students   John Tanner, Christine Chang, and Philipe Manoux
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME113 - Engineering Design Project Class
RR&D advisor   Francisco J. Valero-Cuevas, PhD

Project   Platform for Perturbing Balance
Students   Sangona Oriedo, Becky Hansen, and Ben Lipson
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME113 - Engineering Design Project Class
RR&D advisor   Eric E. Sabelman, PhD

Project   Integration of touch sensors in the Greifer end-effector of the ProVAR assistive robot system
Students   Patrick Catton, Mike Waldo, and Kevin Wooley
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME113 - Engineering Design Project Class
RR&D advisor   H.F. Machiel Van der Loos, PhD

Project   Design of an Automobile Hand Control Gas-to-Brake Reaction Time Tester
Students   Bobby Smith, Alex Duno, and Ronald Rhea
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME113 - Engineering Design Project Class
Coach   Edward Brodd

Project   Design & Development of an Over-the-Bed Book Reader for People with Quadriplegia
Student   Steve Chow
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME116c - Advanced Product Design Project Class
RR&D advisor   Maurice LeBlanc, MS

Project   Development of a Control Panel for the Contrast Bath for People with Arthritis
Student   Gabriela Robles
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME191/291 - Independent Study
RR&D advisors   Beatrice Netter, MS and Eric E. Sabelman, PhD

Project   Recording Motion Patterns during Lateral Falls
Student   Jamie van Hoften
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME191/291 - Independent Study
RR&D advisors   Ruth Yap, MS and Eric E. Sabelman, PhD

Project   C+ Programs for Accelerometry Data Processing
Student   Ken Mah
Facility   Dept. Mechanical Engineering, Stanford University
Class   ME191/291 - Independent Study
RR&D advisors   Betty S. Troy, MS and Eric E. Sabelman, PhD

Project   Mechanically assisted upper limb movement for assessment and therapy
Student   Jean Louis Racine
Facility   Dept. Mechanical Engineering, Stanford University
Class   Independent Study
RR&D advisors   :Peter S. Lum, PhD.and H.F. Machiel Van der Loos, PhD

Project   Development of an assistive robot for effective health care delivery
Students   Joe Wagner, Kyong-Sok Chang, Niels Smaby, Oscar Madrigal, and Wendy Chang
Facility   Dept. Mechanical Engineering, Stanford University
Class   Independent Study
RR&D advisor   H.F. Machiel Van der Loos, PhD

Independent Study
1996
Project   Bacterial infection resistance of semi-artificial connective tissues in vitro
Student   Derek Timmermann, Stanford University
RR&D contact   Eric E. Sabelman, PhD

Project   Sterile enviromental chamber for physical testing of living semi-artificial tissues
Student   Courtney Elizabeth Angle, Stanford University
RR&D contact   Eric E. Sabelman, PhD

Project   Human trials of falls induced during walking
Student   Cicely Washington, Brown University
RR&D contact   Eric E. Sabelman, PhD

Project   Forces supported by canes and crutches during walking and daily activities
Student   May Liu, 1996 PVA/SCI Summer Scholars Program, Case Western Reserve University
RR&D contact   Eric E. Sabelman, PhD
1995
Project   Rehabilitation robotics exhibit for technology museum
Student   W. Smith, Stanford University
RR&D contact   H.F. Machiel Van der Loos, PhD

Project   Design of a hot/cold mist generator for pain relief of the arthritic hand
Student   Douglas Okamoto
RR&D contact   Eric E. Sabelman, PhD

Project   Controlled creation of falls in the laboratory, part 2
Student   James Lin
RR&D contact   Eric E. Sabelman, PhD

Project   Non-sutured artificial nerve graft implantation using UV-cured tissue adhesive
Student   Jeffrey Towson, Stanford Univeristy
RR&D contact   Eric E. Sabelman, PhD
1994
Project   Virtual reality modalities for presentation of performance information
Student   Frances Andrade, San Jose State University
RR&D contact   Eric E. Sabelman, PhD and Gayle E. Curtis, MS

Project   Fabrication and physical testing of semi-artificial connective tissue grafts
Student   Nicole Diep, Stanford University
RR&D contact   Eric E. Sabelman, PhD and Bill Lineaweaver, MD
California State University Projects
1996
ME195 Senior Mech Engr Project, SJSU
Project   Mechanical hand for below-elbow body-powered prosthetic arm
Students   John Garcia, James Ritson, and Kristi Williams
RR&D contact   Maurice LeBlanc, MS
Stanford University Design Projects
1996
ME113 Undergraduate Engineering Design
Project   Bicycle handlebars for people with arthritis
Students   Nikki Toyama, Keren Moses, and Nicole Diep
RR&D contact   Beatrice Netter, MS

Project   Dispenser for EMG electrode jelly & tape
Students   Eric Mortensen, Harrison Knowles, and Jeffrey Dahmus
RR&D contact   Charles G. Burgar, MD

Project   Millimeter-scale tissue properties testing machine
Students   Susan Fan, David Tay, and Benjamin Yang
RR&D contact   Eric E. Sabelman, PhD

Project   Prosthetic prehensor based on RALPH finger spelling hand
Students   Rebecca Nesbitt, Michael Clarke, and Justin Davis
RR&D contact   David L. Jaffe, MS

Project   Pressure weight relief system for quadriplegics in wheelchairs
Students   Peter Hegi, Joseph Kosinski, and Michael Rosenthal
RR&D contact   James Anderson, JEM

Project   Endoskeletal prosthetic hand
Students   Raj Doshi, Clement Yeh, and Ajit Chaudhari
RR&D contact   Maurice LeBlanc, MS
ME210 Graduate Machine Design
Project   Virtually in person
Students   Matt Schaefer and Shawn Stepper
RR&D contact   H.F. Machiel Van der Loos, PhD
ME 282A,B Special Projects in Biomechanical Engineering
Project   Predicting long bone torsional failure load and initial fracture location based on bone mineral data
Students   Elizabeth Loboa, Vineet Sarin, and Clement Yeh
RR&D contact   Gary S. Beaupré, PhD

Project   Determination of the sensitivity of the Walker-Sonix UBA 575+ to variations in system parameters
Students   Karen Brothers, Shabnam Moon, and Mario Pauda
RR&D contact   Robert Marcus, MD, GRECC

Project   In vitro evaluation of the creep characteristics of bioresorbable screws in metal plate fixation under constant bending moment
Students   Darren Engelkemier, Neerad Lal, Tyler Phillips, and Warren Sze
RR&D contact   Gary S. Beaupré, PhD

Project   Intramedullary nail hole targeting for screws
Students   Steven Kao, Cynthia Munoz, and Gil Naor
RR&D contact   Gary S. Beaupré, PhD
1995
ME113 Undergraduate Engineering Design
Project   Driver's SEAT (steering environment for arm therapy)
Students   Terry Cussen, Christian Dubiel, and Chris Rowe
RR&D contact   H.F. Machiel Van der Loos, PhD

Project   Improved two-point touch discrimination test
Students   Blanca Gomez, Kenneth Attocknie, and Stephen Kao
RR&D contact   Debbie E. Kenney, MS OTR
ME281 Special Projects in Biomechanical Engineering
Project   Fatigue fractures in runners: the role of mechanical loading
Students   Mary Draney, Andra Plenys, and Hanh Le
RR&D contact   Steven A. Kautz, PhD
ME282A,B Biomechanical Engineering Projects
Project   Strength, toughness and integrity of bone/prosthetic interface attachment
Students   Patric McGowan, Kevin Ohashi, and Tony Romero
RR&D contact   Dennis R. Carter, PhD

Project   Determination of human calf muscle physiology as a function of muscles parameters and fitness
Students   Jonathan Fay, Ben Schalet, and Jim Smith
RR&D contact   Felix E. Zajac, PhD

Project   Goniometer design and validation: applications in cervical spine stability
Students   Chi-Ray Chien, Carol Kallfelz-Klemisch, and Brian Hannon
RR&D contact   Eric E. Sabelman, PhD

Project   Distraction osteogenesis of the mandible
Students   Alex Kazaks, Marienne Moro, Jacqueline Nerney, and Joe Wagner
RR&D contact   Jean Heegaard, PhD

Project   Ground reaction force measurement during running
Students   Mary Draney, Hahn Le, and Audra Plenys
RR&D contact   Steven A. Kautz, PhD
1994
ME281 Special Projects in Biomechanical Engineering
Project   A bone loss prevention device for individuals with spinal cord injury
Students   Nancy Searby, Shipla Shroff, and Juan Taboas
RR&D contact   H.F. Machiel Van der Loos, PhD
Sacramento State Rehabilitation Engineering summer interns
1993
Tom Heil - Compression chamber for isolated rat muscle
1992
Cindi Donovan - Self-operated patient lift
David Van Sickle - Constant traction hand exerciser
Stanford University student projects
1994
Course   ME113
Title   Device for inducing controlled falls in the laboratory
Students   Jeff Allison, Mike Cummer, and Dale Perrigo
Advisor   Sherry Shepherd, PhD
RR&D liasion   Eric E. Sabelman, PhD

Course   EE280
Title   Signal analysis hardware & software for body motion accelerometry
Students   Jonathan Leary, Koohyer Minoo, Craig Rich, Pedro Montserrate, and Shin Yi Yen
Advisor   Greg Kovacs, PhD, Bernie Widrow, PhD
RR&D liasion   Eric E. Sabelman, PhD and James Gadd, BS

Course   ME Independent study
Title   Accelerometry of total hip prosthesis patient gait and balance
Students   Brenda Jan, Jackie Lau, Jenny Scheuerlein, and Jason Whitt
Advisor   Dennis Carter, PhD
RR&D liasion   Eric E. Sabelman, PhD and James Gadd, BS.
1993
Course   ME113
Title   Multi-degree-of-freedom reaction time tester
Students   Michelle Cox, Greg Lamps, Jay Larlarb, and Greg Lincicome
Advisor   Sherry Shepherd, PhD
RR&D liasion   Eric E. Sabelman, PhD

Course   ME113
Title   Perturbation thermography to measure skin blood flow
Students   Benjamin Chang and Francisco Villegas
Advisor   Sherry Shepherd, PhD
RR&D liasion   Eric E. Sabelman, PhD

Course   ME281
Title   Oscillating chair for investigation of seated dynamic response
Students   Robert O'Toole, Charmaine Toy, and Tse-Yong Yao
Advisor   Dennis R. Carter, PhD
RR&D liasion   Eric E. Sabelman, PhD

Course   ME Independent study
Title   Active servopneumatic wheelchair seating
Student   Kurt Reitner
Advisor   Dennis R. Carter, PhD
RR&D liasion   Eric E. Sabelman, PhD and James Gadd, BS
1992
Course   ME113
Title   Bedside computer stand
Students   Resean Hamilton and Peta Hoyes
Advisor   Sherry Shepherd, PhD
RR&D liasion   Joy Hammel, MS OTR

Course   ME113
Title   Floppy disk inserter for quadriplegic computer users
Students   Rob Flores, Kelsey Lê, and Audrey Wooding
Advisor   Sherry Shepherd, PhD
RR&D liasion   Joy Hammel, MS OTR

Course   ME281
Title   A device for passive rotation of the lower extremity
Students   John Chang and Joann Bidon
Advisor   Dennis R. Carter, PhD
RR&D liasion   David A. Brown, PhD, PT
1991
Course   ME210abc, Graduate Machine Design
Title   Patient support for walking rehabilitation
Students   Carol Smallwood and Darren Bonstetter
Advisor   Larry Carlson, Children's Hospital at Stanford
RR&D liasion   Eric E. Sabelman, PhD

Course   Neurology 199, Directed Study
Title   Quantitative electromyography
Students   Albert Cha and Danny Camacho
Advisor   Leslie Dorfman, MD
RR&D liasion   Kevin C. McGill, PhD

Course   Biology senior honors project
Title   A device for locating joint centers during pedaling
Student   Andrew Reisner
RR&D liasion   David A. Brown, PhD, PT

Course   Biology senior honors project
Title   Effects of gravity on one-legged pedaling
Student   Ming Wu
Advisor   Felix E. Zajac, PhD
RR&D liasion   David A. Brown, PhD, PT

Button Bar

People Projects Publications Resources Home