Re: 6.11

[kconnell@ryerson.ca]

We will be upgrading from 6.0.2 to 6.1.1.


Ken Connell
Intermediate Network Engineer
Computer & Communication Services
Ryerson University
350 Victoria St
RM AB50
Toronto, Ont
M5B 2K3
416-979-5000 x6709

----- Original Message -----
From: Donal Lynch <donal@yorku.ca>
Date: Thursday, December 18, 2003 3:18 pm
Subject: Re: 6.11

> Greetings,
> 
> I'd be interested in knowing what versions people were running
> before the upgrade.  In otherwords, were you going from 6.x or 5.x
> to 6.11.  We're still running 5.3.x so I'd really like to know if
> anybody has successfully upgraded from 5.3 to 6.11.
> 
> Thanks,
> 
>          Donal
> 
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Donal Lynch                                 <donal@yorku.ca>
> Asst. Manager (Network Design & Admin)  416.736.2100 x 20282
> Computing & Network Services               fax: 416.736.5701
> 
>              York University, Toronto, Canada
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> On Thu, 18 Dec 2003, Steve Campbell wrote:
> 
> >
> > > Anyone upgrade yet to 6.11???
> >
> > Yes, I upgraded our 8500 this morning. I did the basic upgrade. 
> Then I noticed that the release notes say to reset the 
> "measurement engine" after the upgrade to be able to read new 
> measurement items. So I did that. It requires an extra reset of 
> the box.
> >
> > For the first 10-15 minutes after the second reset, the unit 
> seemed to be shaping traffic too much, ie not passing all traffic 
> it should. This is during a very light traffic time of day. I 
> thought I might have to back out the upgrade, but after a few 
> minutes it settled down. It's now been up fine for 6 hours.
> >
> > We upgraded to fix the FTP-causes-reboot problem. We upgraded 
> now because it's termbreak.
> >
> > Steve Campbell
> > Dartmouth College
> >
> > -++**==--++**==--++**==--++**==--++**==--++**==--++**==--++**==--
> ++**> This message was posted through the Stanford mailing list 
> server. To
> > subscribe/unsubscribe, send email to majordomo@lists.stanford.edu
> > with "subscribe packeteer-edu" or "unsubscribe packeteer-edu" as 
> the body.  Archive
> > is at http://www.stanford.edu/group/networking/netlists/
> >
> -++**==--++**==--++**==--++**==--++**==--++**==--++**==--++**==--++**
> This message was posted through the Stanford mailing list server. To
> subscribe/unsubscribe, send email to majordomo@lists.stanford.edu
> with "subscribe packeteer-edu" or "unsubscribe packeteer-edu" as 
> the body.  Archive
> is at http://www.stanford.edu/group/networking/netlists/
> 

-++**==--++**==--++**==--++**==--++**==--++**==--++**==--++**==--++**
This message was posted through the Stanford mailing list server. To
subscribe/unsubscribe, send email to majordomo@lists.stanford.edu
with "subscribe packeteer-edu" or "unsubscribe packeteer-edu" as the body.  Archive
is at http://www.stanford.edu/group/networking/netlists/